Home Products Waveguides Horns (Rectangular, Circular and Dielectric Filled)

Horns (Rectangular, Circular and Dielectric Filled)

We offer a range of standard gain Horns from WG10 (WR284) to WG22 (WR28) in three values, 10dB, 15dB and 20dB. These horns are fully compatible to horns manufactured by... Read full description

Categories: Waveguides

Description Specifications Enquire

We offer a range of standard gain Horns from WG10 (WR284) to WG22 (WR28) in three values, 10dB, 15dB and 20dB. These horns are fully compatible to horns manufactured by Quasar Microwave and Mid Century Microwave when calibrating using the “2 antenna method”.

The physically larger sizes are predominantly fabricated in brass, and the smaller sizes electroformed in copper - to maintain the tight tolerances for these smaller waveguide sizes. Horns are manufactured with the full range of International Flange Styles as shown in the Flange Catalogue or with a variety of coaxial connectors on request. All our Horns are offered with an attractive hard wearing, epoxy paint finish.

Other gain values are available on request.

Standard Gain (Broadband) Horns (Gain 10dB, 15dB and 20dB)

Specification:
VSWR: 1.25 : 1
Beamwidth (approx):
10dB = 50 degrees approx
15dB = 32 degrees approx
20dB = 20 degrees approx
Material: Brass, copper or aluminium
Dimensions: see table

Operating Frequency Band (GHz)	Waveguide Designation			Dimensions for 10dB horn			Dimensions for 15dB horn			Dimensions for 20dB horn
Operating Frequency Band (GHz)	UK WG	IEC R	E.I.A. WR	Length “A”	Height “B”	Width “C”	Length “A”	Height “B”	Width “C”	Length “A”	Height “B”	Width “C”
2.60 - 3.95	10	32	284				435	146	200	797	276	375
3.30 - 4.90	11A	40	229				343	119	159	483	260	351
3.95 – 5.85	12	48	187	152	57	76	279	95	127	421	170	230
4.90 - 7.05	13	58	159				241	81	109	413	239	297
5.85 – 8.20	14	70	137	113	41	70	203	67	90	343	121	162
7.05 – 10.0	15	84	112	89	34	44	159	54	73	300	95	130
8.20 – 12.40	16	100	90	70	29	42	157	50	67	273	95	127
10.0 – 15.0	17	120	75	64	26	35			35	216	67	87
12.4 – 18.0	18	140	62	54	21	25	97	32	41	162	54	74
18.0 – 26.5	20	220	42	38	14	17				111	38	51
26.5 – 40.0	22	320	28	41	11	14	51	16	22	84	29	38

Ordering Information

Example: BH 16 A Q Z 402 402 402 402 B 40

BH
- Product code:
  BH = Broadband waveguide horn
16
- Waveguide size:
  British WG size for rectangular waveguide or MIL spec. WRD size for double ridge waveguide
  e.g. 16 = WG16; 750 = WRD750
S
- Type:
  S = standard
Q
- Paint:
  Q = TWS blue (preferred)
  B = black
  G = grey
Z
- Finish:
  Z = no finish
  M = passivate (option for brass)
  H = chromate
  F = iridite (preferred for aluminium)
  A = tin
  B = silver
402
- Input flange:
  Last 3 digits from the flange part no.
  e.g. 402 = UBR flange
B
- Material:
  A = aluminium
  B = brass
- C = copper
10
- Gain
  10 = 10dB
  15 = 15dB
  20 = 20dB